Items 1-10 of 13

Set Descending Direction
  1. Meguin Diesel Additiv
    Meguin Diesel Additive

    SKU: 6560 - 50 l

    Show details
    As low as €0.00
    Mixture of agents with cleaning, dispersing, material-protection and cetannumber increasing properties which has been formulated for today’s engines, fuels and running conditions. The resulting additive-package provides better lubricity for diesel fuels low in sulphur. Due to the increased ignition performance, the fuel shows better combustion behaviour when the engine is cold and the pollution from odours in the exhaust is reduced. Instruction: To keep the injectors clean and for corrosion protection, Meguin Diesel Additive is added to the passenger vehicle diesel tank every 2000km. When decommissioning and preserving engines,
    add Meguin Diesel Additive to the diesel fuel at the rate of 1%. Follow the instructions on preservation. It can be mixed with the fuel at any time since mixing takes place. Dosage rate: 1:300. Learn More
  2. Meguin Fuel System Cleaner
    Meguin Fuel System Cleaner

    SKU: 6550 - 250 ml

    Show details
    As low as €0.00
    Highly effective combination of active agents for cleaning and protection. This product is formulated in accordance with the latest standard of fuel and additive technology and meets the requirements of today’s engines, fuels and running conditions. It is suitable for all gasoline fuel injection systems such as K-; KE- and L- Jetronic systems, etc. For rectifying problems such as difficulties with starting, irregular idling, poor throttle response, performance losses, surges due to lean mixture and poor exhaust values caused by contaminated injection systems. Repeat treatment if problems reoccur. It is suitable for all gasoline injection systems.
    Application: One 250 ml can is sufficient for up to 50 litres of fuel. This product is effective over 2000 km. Fuel System Cleaner can be mixed with fuel at any time since mixing is spontaneous. Learn More
  3. Meguin Carburetor Cleaner
    Meguin Carburetor Cleaner

    SKU: 8493 - 50 l, 1892 - 195 l

    Show details
    As low as €0.00
    Modern, ash-free combination of additives with cleaning and dispersing properties which protects the carburetor components. The Product has been formulated using state-of-theart additive and fuel technologies in accordance with the requirements of today’s engines, fuels and running conditions. Used as an additive for the fuel of all 2-stoke and 4-stroke petrol engines, especially for motor vehicle engines. Also used for small engines for ships and industry. For decommissioning and preserving engines, add Carburetor Cleaner to the petrol at the rate of 1 %. Follow the instructions for decommissioning and preserving engines. Application: One 250 ml can is sufficient for 50 litres of fuel. Mix the contents of the can with fuel. Mixing takes place automatically. Add to the fuel every 2,000 km for long-term effect. The fuel tank should be at least half to completely full. For constant use, add to the fuel at the rate of 0.3 – 0.5 %. Learn More
  4. Meguin Octane Booster
    Meguin Octane Booster

    SKU: 6577 - 150 ml, 33081 - 150 ml

    Show details
    As low as €0.00
    For universal use and increases the research octane number (RON) of the fuel by 2-4 points, depending on the fuel quality. The engine performance is optimized and engine damage caused by knocking combustion is prevented.

    Application: Mix with the fuel. The contents of one 150 ml can are sufficient for a maximum of 50 liters of gasoline. Note: Do not store the product at temperatures >39° C for extended periods!

    Learn More
  5. Meguin Diesel System Cleaner
    Meguin Diesel System Cleaner

    SKU: 6551 - 250 ml, 9690 - 250 ml

    Show details
    As low as €0.00
    Contains a mixture of agents with cleaning, dispersing and materialprotection properties as well as cetane number enhancing properties and has been formulated for today’s engines, fuels and running conditions. Added to the diesel fuel for all diesel engines in passenger and heavy goods vehicles, tractors, construction machinery and stationary engines. Ideally suitable for preserving engines when decommissioned for long period under extreme conditions. Application: Add Diesel System Cleaner to the fuel tank of the vehicle before filling with fuel. Sufficient for up to 50 litres of diesel fuel. Learn More
  6. Meguin Radiator Cleaner
    Meguin Radiator Cleaner

    SKU: 9681 - 250 ml, 6553 - 250 ml

    Show details
    As low as €0.00
    A concentrate specially developed for cooling systems in general but particularly those in motor vehicles. Dissolves contaminations of limy and oil containing in radiators, heating systems, pipes and in engines. A modern formula that contains chelating agents with active cleaning agents. Suitable for all cooling water systems in motor vehicles, buses and commercial vehicles.
    Application: Add contents to the cooling water. Run the heating system. Allow the engine to the run for about 30 minutes at running temperature. Drain the cleaner and flush out the cooling system with water. Fill the cooling system according to the manufacturer’s instructions. The content (250 ml) is sufficient for 10 litres of water. Learn More
  7. Meguin Radiator Safe
    Meguin Radiator Safe

    SKU: 6554 - 250 ml, 9680 - 250 ml

    Show details
    As low as €0.00
    Dispersion for sealing leaks in water-cooling systems in motor vehicles. The product reliably seals hair cracks and small leaks. The solids dispersion is stabilised in carrier fluid. Used for sealing small leaks in cooling circuits of passenger motor vehicles, commercial vehicles, busses and two-wheel vehicles. Also suitable for cooling circuit with filters. Application: Shake well before use! Add contents to the cold cooling system. Start up the heater. Then drive the vehicle for at least 10 minutes. Contents of can will treat up to 10 liters of coolant. Learn More
  8. Meguin Visco Safe
    Meguin Visco Safe

    SKU: 6555 - 250 ml

    Show details
    As low as €0.00
    Modern, mono-functional high-performance additive for stabilizing the viscosity of motor oils. Visco Safe offers outstanding protection against mechanical and therefore permanent shear losses to the oil under extreme running conditions and is effective against the thinning of motor oils due to frequent cold starts. For all passenger vehicles and commercial vehicles, gasoline and diesel engines in new and used vehicles. Not suitable for use on motorbikes with wet clutches! Application: Can contents (250ml) are sufficient for 4 litres of motor oil. After adding to the motor oil, allow the engine to run warm. The product can be added at any time. Learn More
  9. Meguin Motor Flush
    Meguin Motor Flush

    SKU: 6556 - 250 ml

    Show details
    As low as €0.00
    Flushes out and cleans the engine from the inside. Highly effective cleaning additives dissolve sludge and lacquer formers, envelop solid dirt particles and liquid contaminants and are drained along with the motor oil during an oil change. Engines stripped of deposits and contaminants then can deliver their full performance when fresh oil is filled. For cleaning and flushing out the oil circuits of gasoline and diesel engines. The use is dependent on the degree of contamination of the oil circuit. Can be safely used in vehicles with toothed belt running in oil. Not suitable for use in motorbikes with wet clutches.
    Application: 250 ml sufficient for up to 4 l of oil. Add to the motor oil at running temperature before changing the oil. After it has been added, let the engine idle for 10 – 15 minutes. Then change the oil and the filter. Compatible with commercially available motor oils. (Not available for order in Germany) Learn More
  10. Meguin Oil Safe
    Meguin Oil Safe

    SKU: 6557 - 250 ml

    Show details
    As low as €0.00
    Rejuvenates rubber and plastic engine seals and reduces oil consumption via the piston rings and valve guides; counteracts the loss in viscosity of motor oils. Stop the polluting oil stains on the street and in the garage. For all gasoline and diesel engines: Compatible with all commercially available motor oils. Not suitable for use on motorbikes with wet clutches! Application: One 250 ml can of Oil Safe is sufficient for 3.5 litres of motor oil. The product can be added at any time. After adding, run the engine until warm. Sealing first takes effect after about 800 km. To guarantee a lasting effect, add Oil Safe after each oil change. Learn More
per page