Oil-Additives

Modern, mono-functional high-performance additive for stabilizing the viscosity of motor oils. Visco Safe offers outstanding protection against mechanical and therefore permanent shear losses to the oil under extreme running conditions and is effective against the thinning of motor oils due to frequent cold starts. For all passenger vehicles and commercial vehicles, gasoline and diesel engines in new and used vehicles. Not suitable for use on motorbikes with wet clutches! Application: Can contents (250ml) are sufficient for 4 litres of motor oil. After adding to the motor oil, allow the engine to run warm. The product can be added at any time. Learn More

Flushes out and cleans the engine from the inside. Highly effective cleaning additives dissolve sludge and lacquer formers, envelop solid dirt particles and liquid contaminants and are drained along with the motor oil during an oil change. Engines stripped of deposits and contaminants then can deliver their full performance when fresh oil is filled. For cleaning and flushing out the oil circuits of gasoline and diesel engines. The use is dependent on the degree of contamination of the oil circuit. Can be safely used in vehicles with toothed belt running in oil. Not suitable for use in motorbikes with wet clutches.
Application: 250 ml sufficient for up to 4 l of oil. Add to the motor oil at running temperature before changing the oil. After it has been added, let the engine idle for 10 – 15 minutes. Then change the oil and the filter. Compatible with commercially available motor oils. (Not available for order in Germany) Learn More

Rejuvenates rubber and plastic engine seals and reduces oil consumption via the piston rings and valve guides; counteracts the loss in viscosity of motor oils. Stop the polluting oil stains on the street and in the garage. For all gasoline and diesel engines: Compatible with all commercially available motor oils. Not suitable for use on motorbikes with wet clutches! Application: One 250 ml can of Oil Safe is sufficient for 3.5 litres of motor oil. The product can be added at any time. After adding, run the engine until warm. Sealing first takes effect after about 800 km. To guarantee a lasting effect, add Oil Safe after each oil change. Learn More

Multifunctional high performance additive for reducing friction and wear and stabilizing viscosity. It protects engine oil against viscosity loss even under the harshest conditions and protects the engine against wear. Motor Safe is based on the latest additive technology and is compatible with all synthetic and mineral engine oils. For all gasoline and diesel engines in new and used cars.

Application: One 250 ml can of Motor Safe is sufficient for max. 6 litres engine oil. After adding to the engine oil, allow the engine to run warm. The product can be added at any time. Learn More

High performance additive that damp the noise generation of contaminated and sticky hydraulic tappets. Cleans valve bores and thus ensures optimal functioning again. For all gasoline and diesel engines. Can be mixed with all commercially available engine oils. Note: Not suitable for motorbikes with wet clutches! Application: One 250 ml can is sufficient for up to 5 litres motor oil. The product can be added at any time. After adding run the engine until warm. For a lasting effect, Hydraulic Lifter Additive must be added after each oil change. Learn More